A tempo-synchronized filter modulation plugin that applies algorithmic patterns to control filter cutoff frequency in real-time. The plugin includes eight pre-programmed rhythmic patterns ranging from basic steady pulses to more complex syncopated and random sequences, with tempo sync divisions from 1/32 notes up to 2-bar cycles. Four standard filter types (low-pass, high-pass, band-pass, and notch) with adjustable resonance and intensity parameter controls to modulate depth across the frequency range. The pattern sequencer automatically advances based on host tempo information.

Read More

Four-stage parallel delay that creates complex rhythmic patterns from four independent delay lines. Each stage features tempo-synced note divisions from 1/16 notes to 2 beats, with individual feedback and level controls for precise sound shaping. The parallel architecture lets you layer different rhythmic divisions simultaneously and easily create a layered sonic image. The plugin also adds analog warmth through built-in soft clipping and filtering in the output stage. Craft polyrhythmic echoes, evolving ambient textures, and percussive delay effects while staying in the pocket.

Read More

An advanced reverb and delay hybrid processor designed for creating evolving spatial and rhythmic textures. The reverb engine features a unique freeze control that automatically captures new reverb tails on tempo-synchronized beats when engaged above zero, allowing frozen tails to evolve rhythmically while new material continues through the live reverb. The delay section offers ten tempo-sync divisions from whole notes to triplet eighths with feedback, mix, and bypass controls. This architecture excels at creating ambient soundscapes where frozen reverb tails build complex layered textures that develop over time, while the synchronized delay adds rhythmic movement and depth to the evolving spatial field.

Read More

Human vocal VST - VoXoV vol.19 has landed.

And this time, CAT is at the controls.

You'll find VoXoV vol.19 for free inside the VoXoV BNDL Chill.

From our CAT to your speakers – enjoy, get inspired, and keep creating.

Read More

This plugin features a time-based delay line without any LFO modulation. Instead of a traditional time knob, a Frequency control sets the delay time by defining the frequency of the first notch (dip) in the resulting comb filter. This approach allows for intuitive shaping of the comb filtering effect through frequency targeting.

Please note: At higher frequency settings, the position of the first dip may become slightly inaccurate relative to the value set on the Frequency knob, due to internal resolution limitations.

Read More

Revealed Spire Pronoia Pads is a collection of 50 presets to bring aesthetic tension and atmospheric storytelling options to your tracks.

Filled with Space Ambient, Cinematic, and Sci-Fi Soundscapes, this suite delivers a rich palette of cosmic fields, evolving pads, ethereal drones, and interstellar textures. Each preset is equipped with modwheel controls and intuitive macros, giving you enhanced flexibility in shaping your sound just how you want it.

With Revealed Spire Pronoia Pads, you gain source sounds that make your tracks feel inevitable. You don't force them to work. They just do.

Reveal Yourself.

Revealed Spire Pronoia Pads - Details
DRONE (9)
PAD (41).

50 presets
Core synthesizer patch mapping and programming
All presets assigned intuitive modwheel parameters
All presets assigned all four macro controls for easy tweaking and multiple sound variations.

Preset format(s): .fxp
Preset format(s): .swzip (Full Bank) + .spf2 (Individual Presets)
Note: Presets Require Full Retail Version of Spire 1.5.16 or later.

Read More

SynthFlow is a powerful virtual synthesizer designed to deliver rich, expressive, and evolving sounds through a modern synthesis engine. Featuring four high-precision oscillators, dual envelopes, a flexible modulation system, and a suite of studio-grade effects, SynthFlow gives producers full creative control—from lush pads to aggressive basses and intricate textures. Whether you're scoring, producing electronic music, or crafting cinematic soundscapes, SynthFlow is built to inspire.

Key Features

4 Powerful Oscillators

Four independent oscillators with multiple waveform selections and precise tuning options. Create deep, layered sounds or intricate harmonic interactions using advanced XY morphing for real-time waveform blending.

Multi-Mode Filter

Shape your sound with a professional-grade filter section offering Low Pass, High Pass, Band Pass, and Notch modes. Includes adjustable cutoff, resonance, and envelope modulation for smooth filter sweeps and dynamic movement.

Dual ADSR Envelopes

Two dedicated ADSRs for amplitude and filter control, featuring logarithmic scaling for more natural and musical response. Full control over Attack, Decay, Sustain, and Release lets you sculpt everything from tight plucks to evolving pads.

Dual LFO System

Add movement and life with two flexible LFOs, each with five selectable waveforms. Modulate oscillator pitch, filter cutoff, amplitude, and more to build dynamic patches with rhythmic or evolving modulation.

Professional Effects

Enhance your sounds with high-quality reverb, delay, and distortion. Tweak room size, feedback, and drive for studio-polished depth and grit—without needing external plugins.

40+ Automatable Parameters

Complete hands-on control with over 40 tweakable parameters, all automation-ready in your DAW. Easily craft, save, and recall your favorite sounds with a professional preset system.

Ideal For:

Read More

The right sounds for your music... Not your ordinary Keys.

When you need that "Sound" for Soul.

In styles where emotion and atmosphere are everything, having harmonically rich and sonically balanced layers is key to delivering that signature soulful vibe. Whether you're building a slow jam or a jazzy groove, these keys provide the perfect foundation:

Now available at the Soul Keys VST webpage.

Read More

Walkthrough

YouTube/Zk556X_9o4E

About The Instrument

Textural Viola bridges the gap between the original Textural Violin and its follow-up, Textural Cello. Inspired by techniques developed with composer and Trails collaborator Alexander Parsons, this library features two expressive long articulations, a short col legno, and eerie bend effects. These experimental performances are supported by our signature Atmosphere Layer, transforming raw viola recordings into rich, immersive pad.

Together, all three libraries provide a diverse palette of textures designed to add movement, depth, and subtle complexity- perfect for supporting and enhancing other elements within your composition.

Demo

SoundCloud.com/fracture-sounds/evergreen-marcus-warner

Read More

Dust Verb – Granular Reverb for Evolving Soundscapes.

Dust Verb is a granular reverb plugin designed to transform your sounds into lush, atmospheric textures. Using a unique combination of granular delay, reverb, and advanced DSP, it generates evolving ambient washes, shimmering swells, and delicate sound glows.

Key Features:

Granular Reverb Engine – Create dense, evolving reverbs with adjustable grain density.
Freeze Function – Capture and sustain any sound, transforming it into a soft ambient pad.
Shimmer & Width Controls – Add high-frequency harmonics and stereo depth for expansive soundscapes.
Comprehensive Adjustability – Tweak delay time, pre-delay, size, dust, feedback, and more.
From Subtle to Cinematic – Dial in everything from delicate reverberations to massive, shimmering textures.

Whether you're crafting ambient music, cinematic scores, or experimental sound design, Dust Verb is your go-to tool for adding depth, movement, and atmosphere to any production. Latest plugins and effects available at mondoloops.com.

Read More

The Behringer 150 is a versatile and indispensable utility module for Eurorack, faithfully recreating the multi-functional Roland System-100M 150 module. This all-in-one analog toolkit packs four essential synthesis functions into a single, space-saving unit: a Ring Modulator, a Noise Generator, a Sample and Hold (S&H) circuit, and a Low-Frequency Oscillator (LFO). It is designed to be a central source for creating classic electronic sound effects, generating random modulations, and adding rich textures to your patches.

The module's top section features a classic Ring Modulator for creating metallic, bell-like, and robotic sounds from two audio inputs. Below that, a flexible Noise Generator provides both white and pink noise outputs, perfect for creating percussion or as a source for the S&H. The Sample and Hold section, with its own internal clock and lag control, is ideal for generating the classic "staircase" random voltages. Finally, the LFO section provides both square and triangle wave outputs and can be used as a clock for the S&H or as an independent modulation source. With its multiple, interconnected functions, the 150 is a creative powerhouse for sound design and exploration.

Features

Read More

The Behringer 172 is a multi-talented, all-analog effects module for Eurorack, faithfully recreating the classic Roland System-100M 172 module. This single unit packs a lush 6-stage Phase Shifter, a bucket-brigade (BBD) analog Delay, and a gate-able Low-Frequency Oscillator (LFO) into one comprehensive package. It's a perfect tool for adding swirling movement, spatial depth, and rhythmic echoes to your patches, providing a wide palette of classic analog effects that can bring any sound to life.

The module is divided into three interconnected sections. The Phase Shifter provides controls for shift frequency and resonance, creating rich, sweeping psychedelic effects. The analog Delay, based on BBD technology, offers controls for delay time and feedback (intensity), perfect for everything from short slap-back echoes to long, degrading repeats. Both the phaser and the delay can be modulated by the onboard LFO or by external CV sources. The LFO section itself can be used as a dedicated modulation source for the effects or for other modules in your system, and it can be activated or deactivated with a gate signal, allowing for rhythmic modulation effects that are perfectly in time with your sequence.

Features

Read More

The Behringer 173 Quad Gate / Multiples is a fundamental utility module for any Eurorack system, providing an authentic recreation of the essential Roland System-100M 173 module. This space-saving unit combines two indispensable functions: a set of four independent signal gates and two sets of passive multiples. It is designed to be the central hub for routing, switching, and splitting your audio and CV signals, enabling complex patches and precise control over your modular synthesizer.

The top section of the module contains four independent signal gates. These can be thought of as simple on/off switches or basic VCAs that are controlled by a gate or trigger signal. When a gate signal is present at the input, the corresponding audio or CV signal is allowed to pass through to the output. This is perfect for creating rhythmic patterns, routing signals to different destinations based on a trigger, or creating classic trance-gate effects. The bottom section features two passive multiples, each with one input and three outputs. These allow you to take a single signal, such as a clock or a pitch CV from a keyboard, and send identical copies to multiple destinations simultaneously, which is crucial for building complex and synchronized patches.

Features

Read More

Take hands-on control of your melodies and modulations with the Behringer 182 Sequencer, an authentic, all-analog recreation of the classic Roland System-100M 182 module. This Eurorack sequencer provides the immediate, tactile experience of a traditional analog step sequencer, allowing you to manually dial in notes and control voltages with physical knobs. It's the perfect tool for creating repeating melodic patterns, rhythmic filter cutoff changes, or any kind of evolving, stepped modulation you can imagine.

The 182 features two rows of eight steps, each with its own dedicated CV output. This allows you to sequence two different parameters simultaneously—for example, controlling a VCO's pitch with one row while modulating a VCF's cutoff with the other. The sequence is driven by an external clock signal and can be configured to run in either 1-8 or 1-16 step mode. A dedicated "Step" button lets you advance the sequence manually, and a reset input allows you to sync the start of the sequence to your master clock. With its straightforward layout and classic analog workflow, the 182 is an inspiring and essential tool for bringing structured repetition and movement to your Eurorack system.

Features

Read More

The Behringer 2600-VCO brings the powerful and distinctive voice of the legendary ARP 2600 semi-modular synthesizer into the Eurorack format. This module is an authentic, all-analog recreation of the 2600's voltage-controlled oscillator, renowned for its stability, wide frequency range, and versatile feature set. It serves as a robust and harmonically rich sound source, perfect for forming the foundation of any subtractive synth patch, whether you're crafting gritty basses, searing leads, or complex, evolving textures.

The 2600-VCO provides four simultaneous waveform outputs: sine, triangle, sawtooth, and pulse, giving you a diverse palette of starting timbres. For added animation, the pulse wave's width can be adjusted manually or modulated with a CV signal for classic PWM sounds. The oscillator features a coarse frequency range selector (from LFO to audio rate), a fine-tuning knob, and dedicated inputs for both exponential and linear frequency modulation (FM), allowing for everything from subtle vibrato to wild, clangorous effects. This module is a fantastic way to add the coveted sound of a classic 2600 oscillator to your modular rig.

Features

Read More

Inject organic unpredictability and texture into your patches with the Behringer 1016, an authentic recreation of the legendary ARP 2500 series 1016 dual noise and random voltage generator. This versatile Eurorack module is a crucial utility for any modular system, providing a rich source of both audio-rate noise and slow, fluctuating random voltages. It's the perfect tool for creating percussive sounds, emulating wind and surf effects, or generating random modulations that can bring life and movement to otherwise static patches.

The 1016 features two independent analog noise generators. The first provides white, pink, and red (or brown) noise outputs, offering a full spectrum of noise colors for various applications. The second generator produces just white noise. Below the noise sources is a random voltage generator section that outputs both slow and fast random voltages, perfect for modulating filter cutoffs, oscillator pitches, or any other parameter you wish to animate with a non-repeating, unpredictable signal. The module's all-analog design ensures the classic, warm character of the noise and random voltages that were integral to the sound of the original 2500 system.

Features

Read More

The Behringer 1033 is a dual envelope generator for Eurorack, faithfully recreating the functionality and sound of the vintage ARP 2500 series 1033 module. This module provides two independent DADSR(R) envelopes: Delay, Attack, Decay, Sustain, and a second, final Release stage. This advanced envelope structure offers significantly more control over the shape of your modulation signals compared to a standard ADSR, making it ideal for creating complex, evolving textures and nuanced articulations in your modular patches.

Each of the two envelope generators in the 1033 features sliders for each of its five stages, allowing for precise and intuitive control. The initial "Delay" stage before the attack is perfect for creating delayed-onset sounds or complex rhythmic effects. The dual "Release" stages can be triggered independently, offering unique performance possibilities. The module accepts gate signals to trigger the envelopes and also includes manual gate buttons for hands-on activation. With its classic analog circuitry and expanded feature set, the 1033 is a powerful tool for any synthesist looking to add deep, expressive control to their sound palette.

Features

Read More

The Behringer 1036 is an authentic Eurorack recreation of the classic ARP 2500 series 1036 module, a versatile utility that combines a Sample and Hold (S&H) circuit with random voltage generation. This module is a cornerstone for creating the "staircase" voltage patterns famously associated with early electronic music, as well as generating random modulations to bring life and unpredictability to your patches. Whether you want to create classic arpeggio-like sequences or add subtle, organic movement to your filters and oscillators, the 1036 is an essential creative tool.

The module features two independent Sample and Hold circuits. Each circuit takes a signal input and a clock/trigger input; when triggered, it "samples" the voltage of the input signal and holds that voltage at its output until the next trigger arrives. This is commonly used with a noise source to create random stepped voltages. The 1036 conveniently includes an internal clock with adjustable rate and pulse width, as well as two distinct random voltage generators (one utilizing a Zener diode and the other a transistor junction) to serve as internal sample sources, simplifying the creation of random patterns without needing external modules.

Features

Read More

The Behringer 1047 is an authentic Eurorack reproduction of the highly sought-after ARP 2500 series 1047 Multimode Filter and Resonator. This powerful module is more than just a standard filter; it's a complex sound-shaping tool offering four simultaneous filter outputs, making it incredibly versatile for creating rich, evolving timbres. With its ability to self-oscillate and function as a sine wave generator, the 1047 is a deep and musical module that can serve as the heart of a subtractive synth voice or as a powerful sound design station.

The 1047 provides simultaneous low-pass, high-pass, band-pass, and notch filter outputs, each with a 12 dB/octave slope. It features manual controls for the filter's center frequency and resonance (Q), which can be pushed into self-oscillation to create a pure sine wave. The filter frequency can be modulated by two independent CV inputs, each with its own attenuator, for dynamic filter sweeps and effects. The module's distinct architecture and sound make it ideal for everything from classic subtractive filtering to creating complex formant sounds and acting as a powerful resonator for percussive signals.

Features

Read More

The Behringer 1050 is a unique and powerful Eurorack module that faithfully recreates the classic ARP 2500 series 1050 Mix-Sequencer. This module combines the functionality of an eight-channel mixer with a flexible eight-step sequencer, offering a unique approach to both sequencing and audio/CV mixing. It can function as a traditional 8-to-1 mixer, a 1-to-8 sequential switch, or a flexible sequencer for generating complex patterns, making it an incredibly versatile hub for any modular synthesizer setup.

In its primary mode, the 1050 acts as an 8-step sequencer or switch. It can sequentially route a single input signal to one of its eight outputs, or sequentially mix up to eight input signals to a single output. The sequence can be advanced using an internal or external clock, and features dedicated inputs for resetting the sequence and enabling/disabling steps. A standout feature is the dual semi-tone/tone quantizer, which can conform the output voltages to a musical scale. With manual on/off switches for each channel and CV inputs for controlling the clock rate, the 1050 excels at creating intricate melodic sequences, complex modulation patterns, and dynamic audio routing effects.

Features

Read More